FLAIR® Equine Nasal Strips

FLAIR Prep Pack


Available exclusively at www.flairstrips.com, our FLAIR™ Prep Pack contains 10 individually packaged 70% isopropyl alcohol pads. With a handy carabiner clip, it's perfect to attach to your grooming bag or hang in your tack room!

Before applying a FLAIR® Strip in humid conditions, it may be helpful to prep the Strip application area with isopropyl alcohol. Isopropyl alcohol will help remove moisture from the hair to improve adhesion.

Step 1 - Clean the horse's nose with a dry cloth.

Step 2 - Wipe the nose with the isopropyl alcohol pad and let it fully evaporate.

Step 3 - With your clean cloth, brush the horse’s hair upward (from nostrils to forehead).

Step 4 - Apply the FLAIR Strip.

Current stock:

How To Apply

For best results, apply FLAIR Strips at least 30 minutes prior to exercise, riding or any other activity that may cause the horse to sweat.

Before use, remove dirt and oil from the horse's nose with a clean, dry cloth or paper towel and brush hair on the nose upward.

Visit our YouTube Channel for alternative application methods >

Where to Store

Store FLAIR Strips at room temperature.

Strips that are exposed to extreme heat or cold may not adhere properly.

FLAIR Strips should be stored at 50-80°F (10-26°C). For best results, apply Strips when they are close to the same temperature as the horse’s skin.

How to Remove

Remove FLAIR Strips by peeling gently, but firmly from the top corner toward the middle.

Don't remove by pulling up or down. Adhesive may cause slight loss of hair, as experienced with normal shedding.

FLAIR Strips are a one-time use product; but, they can be left on until the horse rubs it off or the adhesive wears out and the Strip falls off.